« PreviousContinue »
ELEMENTS OF GEOMETRY.
1. GEOMETRY is the science which has for its object the measurement of extension.
Extension has three dimensions, length, breadth, and height, or thickness.
2. A line is length without breadth, or thickness.
The extremities of a line are called points : a point, therefore, has neither length, breadth, nor thickness, but position only.
3. A straight line is the shortest distance from one point to another.
4. Every line which is not straight, or composed of straight lines, is a curved line.
Thus, AB is a straight line; ACDB is a broken line, or one composed of straight A lines; and AEB is a curved line.
The word line, when used alone, will designate a straight line; and the word curve, a curved line.
5. A surface is that which has length and breadth, without height or thickness.
6. A plane is a surface, in which, if two points be assumed at pleasure, and connected by a straight line, that line will lie wholly in the surface.
7. Every surface, which is not a plane surface, or composed of plane surfaces, is a curved surface.
8. A solid or body is that which has length, breadth, and thickness; and therefore combines the three dimensions of extension. .
9. When two straight lines, AB, AC, meet each other, their inclination or opening is called an angle, which is greater or less as the lines are more or less inclined or opened. The point of intersection A is the vertex of the
-B angle, and the lines AB, AC, are its sides.
The angle is sometimes designated simply by the letter at the vertex A; sometimes by the three letters BAC, or CAB, the letter at the vertex being always placed in the middle.
Angles, like all other quantities, are susceptible of addition, subtraction, multiplication, and division.
Thus the angle DCE is the sum of the two angles DCB, BCE; and the angle DCB is the difference of the two A angles DCE, BCE.
10. When a straight line AB meets another straight line CD, so as to make the adjacent angles BAC, BAD, equal to each other, each of those angles is called a right angle ; and the line AB is said to be perpendicular to CD.
11. Every angle BAC, less than a right angle, is an acute angle ; and every angle DEF, greater than a right angle, is an obtuse angle.
12. Two lines are said to be parallel, when being situated in the same plane, they cannot meet, how far
both of them be produced.
13. A plane figure is a plane terminated on all sides by lines, either straight or curved.
If the lines are straight, the space they enclose is called a rectilineal figure, or polygon, and the lines themselves, taken together, form the contour, or perimeter of the polygon.
14. The polygon of three sides, the simplest of all, is called a triangle ; that of four sides, a quadrilateral; that of five, a pentagon; that of six, a hexagon; that of seven, a heptagon; that of eight, an octagon ; that of nine, a nonagon; that of ten, a decagon; and that of twelve, a dodecagon.
15. An equilateral triangle is one which has its three sides equal ; an isosceles triangle, one which has two of its sides equal ; a scalene triangle, one which has its three sides unequal. 16. A right-angled triangle is one which
с has a right angle. The side opposite the right angle is called the hypothenuse. Thus, in the triangle ABC, right-angled at A, the side BC is the hypothenuse.
B 17. Among the quadrilaterals, we distinguish :
The square, which has its sides equal, and its angles right-angles.
The rectangle, which has its angles right angles, without having its sides equal.
The parallelogram, or rhomboid, which has its opposite sides parallel.
The rhombus, or lozenge, which has its sides equal, without having its angles right angles.
And lastly, the trapezoid, only two of whose sides are paraliel.
18. A diagonal is a line which joins the vertices of two angles not adjacent to each other. Thus, AF, AE, AD, AC, are diagonals.
19. An equilateral polygon is one which has all its sides equal ; an equiangular polygon, one which has all its angles equal.
20. Two polygons are mutually equilateral, when they have their sides equal each to each, and placed in the same order; that is to say, when following their perimeters in the same di. rection, the first side of the one is equal to the first side of the other, the second of the one to the second of the other, the third to the third, and so on. The phrase, mutually equiangular, has a corresponding signification, with respect to the angles.
In both cases, the equal sideş, or the equal angles, are named homologous sides or angles.
Definitions of terms employed in Geometry.
An axiom is a self-evident proposition.
A theorem is a truth, which becomes evident by means of a train of reasoning called a demonstration,
A problem is a question proposed, which requires a solution.
A lemma is a subsidiary truth, employed for the demonstration of a theorem, or the solution of a problem.
The common name, proposition, is applied indifferently, to theorems, problems, and lemmas.
A corollary is an obvious consequence, deduced from one or several propositions.
A scholium is a remark on one or several preceding propositions, which tends to point out their connexion, their use, their restriction, or their extension.
A hypothesis is a supposition, made either in the enunciation of a proposition, or in the course of a demonstration.
Explanation of the symbols to be employed.
The sign = is the sign of equality; thus, the expression A=B, signifies that A is equal to B.
To signify that A is smaller than B, the expression A<B is used.
To signify that A is greater than B, the expression A>B is used;
the smaller quantity being always at the vertex of the angle. The sign + is called plus : it indicates addition.
is called minus : it indicates subtraction. Thus, A+B, represents the sum of the quantities A and B; A-B represents their difference, or what remains after B is taken from A; and A-B+C, or A+C-B, signifies that A and C are to be added together, and that B is to be subtracte from their sum.
The sign x indicates multiplication : thus, A x B represents the product of A and B. Instead of the sign X, a point is sometimes employed ; thus, A.B is the same thing as A x B. The same product is also designated without any intermediate sign, by AB; but this expression should not be employed, when there is any danger of confounding it with that of the line AB, which expresses the distance between the points A and B.
The expression A x (B+C-D) represents the product of A by the quantity B+C—D. If A+B were to be multiplied by A-B+C, the product would be indicated thus, (A+B) X (X-B+C), whatever is enclosed within the curved lines, being considered as a single quantity:
A number placed before a line, or a quantity, serves as a multiplier to that line or quantity; thus, 3AB signifies that the line AB is taken three times; } A signifies the half of the angle A.
The square of the line AB is designated by AB’; its cube by AB. What is meant by the square and cube of a line, will be explained in its proper place.
The sign ✓ indicates a root to be extracted ; thus v2 means the square-root of 2; VAXB means the square-root of the product of A and B.
1. Things which are equal to the same thing, are equal to each other. 2. If equals be added to equals, the wholes will be equal.
3. If equals be taken from equals, the remainders will be equal.
4. If equals be added to unequals, the wholes will be anequal.
5. If equals be taken from unequals, the remainders will be unequal.
6. Things which are double of the same thing, are equal to each other.
7. Things which are halves of the same thing, are equal to each other.
8. The whole is greater than any of its parts.
11 From one point to another only one straight line can be drawn.
12. Through the same point, only one straight line can be drawn which shall be parallel to a given line.
13. Magnitudes, which being applied to each other, coincide throughout their whole extent, are equal.